10 Welding Tools Every Welder Needs
Posted on Oct 03 , 2021
Welding tools and accessories are essential to any welder's arsenal, and it is important that you know what tools you need for your welding needs. A welder's tools are an important part of the job. Without these tools, welding might not be possible at all. These tools can help increase productivity and safety while on the job site.
Welding tools can range from simple things like a good quality pair of safety glasses, all the way up to specialized tools such as gas-cutting torches or MIG welders. There are many different types of welding tools out there, but never fear! We've compiled a list of ten tools every welder needs below so you can get started on your shopping spree right away!
Safety tools should be a priority before anything else and are more important than other tools in some cases so make sure you're always prepared when working with welding tools!
- Safety Glasses
- Welding Gloves
- Auto Darkening Welding Helmet
- Angle Grinder
- Sheet Metal Gauge
- MIG Pliers
- Speed Square
- Chipping Hammer
- Metal File
- C Clamps
- Looking For Welding Tools And Accessories
It goes without saying that safety equipment should be one of the first items on your list. Whether you're using an arc welder or even just cutting metal with a torch, safety glasses can protect your eyes from any stray sparks or hot metal.
Safety goggles are rated for different types of gases so make sure you buy one that protects against what gas you will be welding.
Welding gloves can range from a simple cotton glove to something with five different layers of protection, but any welder knows that welding gloves are essential.
In order for you to weld without burning your hands off or getting severe blisters and burns on the skin, it's crucial that you have good quality welding gloves. There is nothing worse than when you're trying to hold a piece of metal and your fingers start to feel really hot.
You might not know what type of welding gloves are best for you, so we've got that covered too!
3.Auto Darkening Welding Helmet
A welding helmet is essential for safety when you are doing welding. The auto-darkening helmet helps keep your eyes safe from the bright light of the weld. A welding helmet is one of the easiest things to get if you want to do welding.
You might not think that your helmet is important until something happens to it or you forget to wear one on the job site but we want to assure you that this could be detrimental to your health in more ways than one.
Welding helmets are for different things. Arc welding, plasma cutting, and metalwork. You need to have the right helmet for what you do in order to protect your eyes from sparks or other dangerous fumes.
An angle grinder is a welding tool that has been used for decades. It's able to cut metal and can be used as an alternative if you are welding something with the wrong type of gas.
You will always find yourself needing to cut down some metal stock. With a cutting wheel, an angle grinder is able to make quick work of any welding job without the need for another tool.
And allows you to get your project done more quickly than if you did it with just welding tools or pieces that weren't designed specifically for anything else but nothing.
5.Sheet Metal Gauge
The thickness of metal is very important while doing good welding. The sheet metal gauge, also known as the American Wire Gauge (AWG), determines how much current should be used for welding it and whether or not the welding can take place without blowing through the other side.
A welding machine should always be set at the lowest possible current level so as not to blow through the metal.
The sheet metal gauge is a way of giving an approximate idea of how thick or thin the piece of metal you are welding will have gaps in it if too much current is used during welding. For example, copper has a thickness range of 26-28 and welding should be set to the lowest possible current.
MIG pliers are normally available at every hardware store and welding supply shop. A welding instructor recommended getting the medium-sized ones because MIG pliers are typically easier to handle than larger or smaller options.
Welding pliers also come with a variety of attachments, such as wire cutters that can be helpful for cutting out material after welding. They come with clamps that will be very useful to remove the nozzle from the MIG gun. It can also be used to loosen or tighten contact tips.
The handles on these tools are typically made from textured rubber and they're covered in welding wire to help protect them.
A speed square is a versatile tool that can be used at 90-degree and 45-degree angles. It has a triangular shape with two legs, one straight leg, which is usually calibrated in fractions of inches or millimeters, and one curved leg.
The 90-degree angle of the speed square helps you accurately measure a two by four or any other length that needs to be cut on-site. Likewise, the 45-degree angle of the speed square helps to measure and mark any welding seams or joints that need to be cut.
A speed square comes in handy because it measures angles accurately without having to use any complicated math. It is also used to assist in drawing straight lines, which are important for welding work.
A chipping hammer is a welding tool used in welding. It can be very useful for welding stick welding or MIG welding jobs and it has an especially large following among welders in the construction industry.
A chipping hammer weighs about three pounds, which makes it lightweight enough to use with ease without slowing down your work process too much.
This instrument is used to chip away weld slag and excess weld metal. This process can be done with either a wire brush attachment to the end or as an attached apparatus on the handle, making it easy for various tradespeople to use without looking foreign from their own trade.
The metal file is an essential welding tool. Its primary use is to remove rough edges and burrs from the metal that you cut. It also can be used for shaping, smoothing, or detailing work on welding projects like chairs or tables.
A metal file does not have any cutting capabilities; it only removes material by scraping against a surface.
It is used to sharpen and smooth a rough surface that has been cut. The more you use the file, the better it will work. You should not weld with a metal file because welding fumes make the surface brittle and prone to corrosion if left in one spot too long without moving.
C-clamps are a tool for clamping welding tools and the purpose is to maintain organization in your welding shop. There are various sizes of welding clamps that could fit welders, including aluminum or steel with styles for various conditions like hand tools, machined parts, furniture building, or sculpture welding.
C-clamps are used in welding to help tighten the welding workpiece and create a tight seal between it, its welding surface, and any extra material that might be surrounding them.
It is important for you to use c-clamps because they can't cause damage or make welding difficult like other clamps do when tightened too much or not at all.
Looking For Welding Tools And Accessories
We know that you're busy and have a lot to do. You need access to the best welding tools, supplies, and accessories available. That's why we've got one-stop shopping for all your needs at Superior Welding & Fabrication.
Here you'll find everything from welders (gas or electric), torches, safety gear like masks and gloves, parts kits for soldering wire feed units or gas cylinders - even TIG welding tips! Whether it's just an accessory or a new torch kit as well as other necessities in the industry of metalwork, our team is ready with expert advice on what will suit you best.
No matter how big or small your project may be; if it involves any kind of welding process, we want to help you get the job done. Call us today or check our website now.